What is a side return extension?
A side return extension fills the narrow passage that runs alongside the back addition of many Victorian and Edwardian terraced houses. It widens a galley kitchen into a proper kitchen-diner, usually with a sloping glazed roof to keep the room bright.
How much does a side return extension cost in Lancashire?
In Lancashire, a side return extension typically costs £2,150–£3,100 per m² of floor area, including VAT at 20% (standard rate). For a typical 12 m² project that is roughly £26,000–£37,000. Prices across the North West are typically 6% below the UK average for this kind of work, which is reflected in the range for Lancashire. Design, structural calculations and council fees are extra.
| Size or type | Guide range |
|---|---|
| Smaller project (8 m²) | £17,000–£25,000 |
| Typical project (12 m²) | £26,000–£37,000 |
| Larger project (17 m²) | £36,500–£52,500 |
| Rate per m² | £2,150–£3,100 |
The biggest cost drivers are:
- Steel beams and propping of the back addition
- Glazed roof specification
- Access through the house for materials
- Moving drains and soil stacks
Your exact price depends on the survey and drawings. The guide price tool gives a quick range in the meantime.
Do you need planning permission for a side return extension in Lancashire?
Before anything is built in Lancashire, we confirm which approvals apply in England. In England a side return infill is treated as a side extension. It may be permitted development if it is single-storey, no more than 4 metres high and no wider than half the original house, but not in a conservation area. Because side returns sit on the boundary, party wall notices are almost always needed.
Building regulations approval comes from the council’s building control service or a registered building control approver. The work is inspected at key stages, such as foundations, drainage and insulation, and a completion certificate is issued at the end.
We check this for your address before design work starts, so there are no surprises later.
What we handle
The work we manage on a side return extension:
- Steel beams to remove the side wall
- Survey of party walls, drains and the existing back addition
- Building control sign-off
- Floor levelling, heating and electrics
- Foundations and drainage, including any build-over agreement
- Party wall advice and notices
How long does it take?
Build time is typically 10 to 14 weeks on site. Design and approvals come first and typically take 3 to 4 months, depending on the approval route.
Building in Lancashire
Terraced streets across the North West often suit rear dormers and single-storey kitchen extensions.
Towns we cover in Lancashire include Preston, Burnley, Blackburn, Blackpool, Fylde and Rossendale.
How it works
- 01
Survey and brief
We visit, discuss your ideas and budget, and survey the property or site at no cost.
- 02
Drawings and written quote
We prepare the design and give you a written, itemised quote with inclusions and exclusions.
- 03
Approvals
Planning or permitted development confirmation, building regulations and any party wall matters.
- 04
Build and handover
Work follows the agreed programme, with inspections along the way and a completion certificate at the end.
Questions about side return extensions in Lancashire
How long does a side return extension take in Lancashire?
Typically 10 to 14 weeks on site. Design and approvals beforehand usually take 3 to 4 months.
How much space does a side return add?
Typically 1.5 to 2.5 metres of width along the back addition. It often turns a narrow galley kitchen into a family kitchen-diner.
How much does a side return extension cost in Lancashire?
In Lancashire, a side return extension typically costs £2,150–£3,100 per m² of floor area, including VAT at 20% (standard rate). A typical 12 m² project comes to roughly £26,000–£37,000. Your fixed price depends on the survey and drawings.
Is a glass roof too hot or cold?
Modern solar-control double or triple glazing reduces glare and heat loss. Building regulations also limit how much glazing you can have unless the design shows it performs well enough.
How do you get materials in?
Mid-terrace houses often have no rear access, so materials come through the house. We protect floors and plan deliveries carefully.