What is a side return extension?
A side return extension fills the narrow passage that runs alongside the back addition of many Victorian and Edwardian terraced houses. It widens a galley kitchen into a proper kitchen-diner, usually with a sloping glazed roof to keep the room bright.
How much does a side return extension cost in Salisbury?
In Salisbury, a side return extension typically costs £2,350–£3,350 per m² of floor area, including VAT at 20% (standard rate). For a typical 12 m² project that is roughly £28,000–£40,000. Building costs in the South West are close to the UK average, so the figures for Salisbury are close to our national guide. Design, structural calculations and council fees are extra.
| Size or type | Guide range |
|---|---|
| Smaller project (8 m²) | £19,000–£27,000 |
| Typical project (12 m²) | £28,000–£40,000 |
| Larger project (17 m²) | £40,000–£57,000 |
| Rate per m² | £2,350–£3,350 |
The biggest cost drivers are:
- Steel beams and propping of the back addition
- Moving drains and soil stacks
- Party wall surveyor fees
- Glazed roof specification
For a figure based on your own measurements, try the guide price tool, then book a free home visit for a fixed quote.
Do you need planning permission for a side return extension in Salisbury?
The approval route for Salisbury is set by planning law in England. In England a side return infill is treated as a side extension. It may be permitted development if it is single-storey, no more than 4 metres high and no wider than half the original house, but not in a conservation area. Because side returns sit on the boundary, party wall notices are almost always needed.
Where work involves a shared wall, building on the boundary, or digging foundations within 3 metres of a neighbour’s building and deeper than its foundations (or within 6 metres for deeper work), the Party Wall etc. Act 1996 applies and notices must be served before work starts.
If the answer is not clear-cut, we can apply for formal confirmation before you commit to the build.
What we handle
From survey to sign-off, the job normally involves:
- Foundations and drainage, including any build-over agreement
- Building control sign-off
- Steel beams to remove the side wall
- Party wall advice and notices
- Floor levelling, heating and electrics
- Drawings and planning or permitted development check
How long does it take?
Allow 10 to 14 weeks on site. Allow time beforehand for drawings and approvals, usually 3 to 4 months.
Building in Salisbury
The South West mixes stone and render cottages with post-war and newer estates, and local materials matter more here when matching an extension.
Salisbury sits in Wiltshire, about 20 miles north-west of Southampton. We cover the whole of Salisbury, including postcodes SP1.
How it works
- 01
Visit and measured survey
A free visit to understand the project, check access and take measurements.
- 02
Drawings and written quote
We prepare the design and give you a written, itemised quote with inclusions and exclusions.
- 03
Permissions sorted
Applications, building control and neighbour arrangements, all before the start date.
- 04
Construction and completion
We build, put right any snags and hand over the building control certificate.
Questions about side return extensions in Salisbury
Is a glass roof too hot or cold?
Modern solar-control double or triple glazing reduces glare and heat loss. Building regulations also limit how much glazing you can have unless the design shows it performs well enough.
How much space does a side return add?
Typically 1.5 to 2.5 metres of width along the back addition. It often turns a narrow galley kitchen into a family kitchen-diner.
How long does a side return extension take in Salisbury?
Typically 10 to 14 weeks on site. Design and approvals beforehand usually take 3 to 4 months.
How do you get materials in?
Mid-terrace houses often have no rear access, so materials come through the house. We protect floors and plan deliveries carefully.
How much does a side return extension cost in Salisbury?
In Salisbury, a side return extension typically costs £2,350–£3,350 per m² of floor area, including VAT at 20% (standard rate). A typical 12 m² project comes to roughly £28,000–£40,000. Your fixed price depends on the survey and drawings.