What is a side return extension?
A side return extension fills the narrow passage that runs alongside the back addition of many Victorian and Edwardian terraced houses. It widens a galley kitchen into a proper kitchen-diner, usually with a sloping glazed roof to keep the room bright.
How much does a side return extension cost in Yate?
In Yate, a side return extension typically costs £2,350–£3,350 per m² of floor area, including VAT at 20% (standard rate). For a typical 12 m² project that is roughly £28,000–£40,000. Building costs in the South West are close to the UK average, so the figures for Yate are close to our national guide. Design, structural calculations and council fees are extra.
| Size or type | Guide range |
|---|---|
| Smaller project (8 m²) | £19,000–£27,000 |
| Typical project (12 m²) | £28,000–£40,000 |
| Larger project (17 m²) | £40,000–£57,000 |
| Rate per m² | £2,350–£3,350 |
The biggest cost drivers are:
- Moving drains and soil stacks
- Length of the side return
- Steel beams and propping of the back addition
- Access through the house for materials
For a figure based on your own measurements, try the guide price tool, then book a free home visit for a fixed quote.
Do you need planning permission for a side return extension in Yate?
Approvals for a side return extension in Yate follow the rules for England. In England a side return infill is treated as a side extension. It may be permitted development if it is single-storey, no more than 4 metres high and no wider than half the original house, but not in a conservation area. Because side returns sit on the boundary, party wall notices are almost always needed.
Building regulations approval comes from the council’s building control service or a registered building control approver. The work is inspected at key stages, such as foundations, drainage and insulation, and a completion certificate is issued at the end.
If the answer is not clear-cut, we can apply for formal confirmation before you commit to the build.
What we handle
What we take care of:
- Building control sign-off
- Survey of party walls, drains and the existing back addition
- Drawings and planning or permitted development check
- Party wall advice and notices
- Foundations and drainage, including any build-over agreement
- Glazed or solid roof with insulation
How long does it take?
The build itself usually takes 10 to 14 weeks on site. Allow time beforehand for drawings and approvals, usually 3 to 4 months.
Building in Yate
The South West mixes stone and render cottages with post-war and newer estates, and local materials matter more here when matching an extension.
We work across Yate and neighbouring areas such as Mangotsfield, Kingswood and Keynsham. Postcodes we cover in Yate include BS37.
How it works
- 01
Free visit
We look at the property, talk through what you want and measure up. There is no charge and no obligation.
- 02
Design and fixed quote
Drawings, structural calculations and an itemised, fixed price for the agreed specification.
- 03
Approvals
Planning or permitted development confirmation, building regulations and any party wall matters.
- 04
Build and handover
Work follows the agreed programme, with inspections along the way and a completion certificate at the end.
Questions about side return extensions in Yate
Is a glass roof too hot or cold?
Modern solar-control double or triple glazing reduces glare and heat loss. Building regulations also limit how much glazing you can have unless the design shows it performs well enough.
Who approves a side return extension in Yate?
Planning matters in Yate go to the council covering your address, and the work needs building control approval. We prepare and submit the applications for you.
How much does a side return extension cost in Yate?
In Yate, a side return extension typically costs £2,350–£3,350 per m² of floor area, including VAT at 20% (standard rate). A typical 12 m² project comes to roughly £28,000–£40,000. Your fixed price depends on the survey and drawings.
Can I stay in the house?
Usually, though the kitchen will be out of action for several weeks. We plan a temporary kitchen area where possible.
How much space does a side return add?
Typically 1.5 to 2.5 metres of width along the back addition. It often turns a narrow galley kitchen into a family kitchen-diner.