What is a single-storey extension?
A single-storey extension is a ground-floor addition, usually at the rear of a house, that enlarges a kitchen, living or dining space. Most are built with cavity walls on concrete foundations and finished with a flat roof and roof lantern or a pitched tiled roof.
How much does a single-storey extension cost in Clacton-on-Sea?
In Clacton-on-Sea, a single-storey extension typically costs £2,050–£3,050 per m² of floor area, including VAT at 20% (standard rate). For a typical 20 m² project that is roughly £41,000–£61,000. That range is adjusted for the East of England, where domestic building work typically costs around 6% above the national average. Design, structural calculations and council fees are extra.
| Size or type | Guide range |
|---|---|
| Smaller project (14 m²) | £28,500–£42,500 |
| Typical project (20 m²) | £41,000–£61,000 |
| Larger project (28 m²) | £57,500–£85,500 |
| Rate per m² | £2,050–£3,050 |
What moves the price most:
- Roof type and the size of any lantern or roof windows
- Floor area and the length of new wall
- Glazing: sliding and bifold doors cost more than French doors
- Kitchen, flooring and finishes, which we can include or leave to you
For a figure based on your own measurements, try the guide price tool, then book a free home visit for a fixed quote.
Do you need planning permission for a single-storey extension in Clacton-on-Sea?
The approval route for Clacton-on-Sea is set by planning law in England. In England a single-storey rear extension is often permitted development: broadly up to 3 metres deep on a semi-detached or terraced house and 4 metres on a detached house, no higher than 4 metres, with eaves no higher than 3 metres within 2 metres of a boundary, and covering no more than half the garden. The larger home extension scheme allows up to 6 or 8 metres if you notify the council first and neighbours have a chance to comment. In conservation areas, National Parks and National Landscapes the larger home extension route, side extensions and cladding are not permitted development. Flats and houses whose rights have been removed need a planning application, and listed buildings need listed building consent.
Building regulations approval comes from the council’s building control service or a registered building control approver. The work is inspected at key stages, such as foundations, drainage and insulation, and a completion certificate is issued at the end.
If the answer is not clear-cut, we can apply for formal confirmation before you commit to the build.
What we handle
From survey to sign-off, the job normally involves:
- Structural calculations for steels and lintels
- Building control inspections and completion certificate
- Doors, windows and roof glazing installed
- Foundations, drainage and any build-over agreement
- Cavity walls, insulation and roof to current building regulations
- Knock-through to the existing house with steel beams
How long does it take?
Expect 10 to 14 weeks on site for a typical rear extension, after approvals. Design and approvals come first and typically take 6 to 12 weeks, depending on the approval route.
Building in Clacton-on-Sea
Across the East of England, 1930s and post-war semis, newer estates and rural cottages all feature, each with different extension and loft options.
Clacton-on-Sea sits in Essex, about 26 miles north-east of Southend-on-Sea. We cover the whole of Clacton-on-Sea, including postcodes CO15.
How it works
- 01
Visit and measured survey
A free visit to understand the project, check access and take measurements.
- 02
Design and pricing
Design options, then a fixed quote based on the chosen drawings and specification.
- 03
Approvals in place
We handle planning, building control and neighbour notices before work starts.
- 04
Build and sign-off
We run the build to a written programme and hand over the completion certificate.
Questions about single-storey extensions in Clacton-on-Sea
Is VAT charged on an extension?
Yes. Building work on an existing home is standard-rated, so VAT at 20% applies. Our guide prices include it.
How much does a single-storey extension cost in Clacton-on-Sea?
In Clacton-on-Sea, a single-storey extension typically costs £2,050–£3,050 per m² of floor area, including VAT at 20% (standard rate). A typical 20 m² project comes to roughly £41,000–£61,000. Your fixed price depends on the survey and drawings.
How long does a single-storey extension take in Clacton-on-Sea?
Typically 10 to 14 weeks on site for a typical rear extension, after approvals. Design and approvals beforehand usually take 6 to 12 weeks.
What is a build-over agreement?
If a public sewer runs within 3 metres of the extension, the water company normally has to agree to the work before it starts. We check sewer records during design and apply where needed.
Do I need a party wall agreement?
If you are in England or Wales and the work involves a shared wall, building on the boundary or digging foundations close to a neighbour, the Party Wall etc. Act 1996 applies and notices must be served before work starts. We advise on this at the design stage.