What is a single-storey extension?
A single-storey extension is a ground-floor addition, usually at the rear of a house, that enlarges a kitchen, living or dining space. Most are built with cavity walls on concrete foundations and finished with a flat roof and roof lantern or a pitched tiled roof.
How much does a single-storey extension cost in Colchester?
In Colchester, a single-storey extension typically costs £2,050–£3,050 per m² of floor area, including VAT at 20% (standard rate). For a typical 20 m² project that is roughly £41,000–£61,000. That range is adjusted for the East of England, where domestic building work typically costs around 6% above the national average. Design, structural calculations and council fees are extra.
| Size or type | Guide range |
|---|---|
| Smaller project (14 m²) | £28,500–£42,500 |
| Typical project (20 m²) | £41,000–£61,000 |
| Larger project (28 m²) | £57,500–£85,500 |
| Rate per m² | £2,050–£3,050 |
The main things that change the cost:
- Glazing: sliding and bifold doors cost more than French doors
- Ground conditions and foundation depth
- How much of the existing house is opened up
- Kitchen, flooring and finishes, which we can include or leave to you
Your exact price depends on the survey and drawings. The guide price tool gives a quick range in the meantime.
Do you need planning permission for a single-storey extension in Colchester?
Here is how the rules work for a single-storey extension in England. In England a single-storey rear extension is often permitted development: broadly up to 3 metres deep on a semi-detached or terraced house and 4 metres on a detached house, no higher than 4 metres, with eaves no higher than 3 metres within 2 metres of a boundary, and covering no more than half the garden. The larger home extension scheme allows up to 6 or 8 metres if you notify the council first and neighbours have a chance to comment. In conservation areas, National Parks and National Landscapes the larger home extension route, side extensions and cladding are not permitted development. Flats and houses whose rights have been removed need a planning application, and listed buildings need listed building consent.
Building regulations approval comes from the council’s building control service or a registered building control approver. The work is inspected at key stages, such as foundations, drainage and insulation, and a completion certificate is issued at the end.
We check this for your address before design work starts, so there are no surprises later.
What we handle
On a typical single-storey extension we handle:
- Building control inspections and completion certificate
- Structural calculations for steels and lintels
- First and second fix electrics, heating and plastering
- Measured survey and design drawings
- Doors, windows and roof glazing installed
- Knock-through to the existing house with steel beams
How long does it take?
Allow 10 to 14 weeks on site for a typical rear extension, after approvals. Design and approvals come first and typically take 6 to 12 weeks, depending on the approval route.
Building in Colchester
Across the East of England, 1930s and post-war semis, newer estates and rural cottages all feature, each with different extension and loft options.
If your home is in Colchester or close by in Sudbury, Clacton-on-Sea and Witham, a free home visit is the first step.
How it works
- 01
Free visit
We look at the property, talk through what you want and measure up. There is no charge and no obligation.
- 02
Drawings and written quote
We prepare the design and give you a written, itemised quote with inclusions and exclusions.
- 03
Approvals
Planning or permitted development confirmation, building regulations and any party wall matters.
- 04
Construction and completion
We build, put right any snags and hand over the building control certificate.
Questions about single-storey extensions in Colchester
Who approves a single-storey extension in Colchester?
Planning matters in Colchester go to the council covering your address, and the work needs building control approval. We prepare and submit the applications for you.
Is VAT charged on an extension?
Yes. Building work on an existing home is standard-rated, so VAT at 20% applies. Our guide prices include it.
What is a build-over agreement?
If a public sewer runs within 3 metres of the extension, the water company normally has to agree to the work before it starts. We check sewer records during design and apply where needed.
Can I stay in the house during the build?
Usually yes. We build the shell before opening up the back wall, so the house stays weathertight for most of the job. There will be a few weeks when the kitchen or back room is out of use.
How much does a single-storey extension cost in Colchester?
In Colchester, a single-storey extension typically costs £2,050–£3,050 per m² of floor area, including VAT at 20% (standard rate). A typical 20 m² project comes to roughly £41,000–£61,000. Your fixed price depends on the survey and drawings.