What is a structural alteration?
A structural alteration changes how a house carries its loads, most often by removing a load-bearing wall and replacing it with a steel beam. It is how kitchens and dining rooms become open-plan, and how extensions are joined to the original house.
How much does a structural alteration cost in Bideford?
In Bideford, a structural alteration typically costs £4,500–£9,750 for a typical knock-through with steel beam, including VAT at 20% (standard rate). Building costs in the South West are close to the UK average, so the figures for Bideford are close to our national guide. Design, structural calculations and council fees are extra.
| Size or type | Guide range |
|---|---|
| A typical knock-through with steel beam | £4,500–£9,750 |
| Higher specification | £9,750–£12,000 |
Your quote will depend mainly on:
- Span of the opening
- What sits above the wall
- Floor and ceiling repairs
- Moving radiators, sockets and pipes
A guide range is only a starting point: the guide price tool gives an instant figure for your size, and a free survey turns it into a fixed quote.
Do you need planning permission for a structural alteration in Bideford?
Before anything is built in Bideford, we confirm which approvals apply in England. In England removing a load-bearing wall does not need planning permission but does need building regulations approval with an engineer’s calculations. If the beam bears on a party wall, a party wall notice must be served.
Building regulations approval comes from the council’s building control service or a registered building control approver. The work is inspected at key stages, such as foundations, drainage and insulation, and a completion certificate is issued at the end.
At the survey we check your house’s planning history and any restrictions, and tell you which route applies.
What we handle
Handled as part of most structural alterations:
- Fire protection to the steel
- Party wall notices where needed
- Building control application
- Steel beam supply and installation on padstones
- Temporary propping
- Making good, plastering and flooring repairs
How long does it take?
Expect 1 to 2 weeks on site for a typical knock-through. Design and approvals come first and typically take 6 to 12 weeks, depending on the approval route.
Building in Bideford
In parts of the South West, protected landscapes and conservation areas shape what can be built, so materials and roof forms are chosen carefully.
Our Bideford coverage includes postcode districts EX39, and we also work in nearby places such as Barnstaple, Tiverton and Exeter.
How it works
- 01
Visit and measured survey
A free visit to understand the project, check access and take measurements.
- 02
Drawings and written quote
We prepare the design and give you a written, itemised quote with inclusions and exclusions.
- 03
Approvals
Planning or permitted development confirmation, building regulations and any party wall matters.
- 04
Build and handover
Work follows the agreed programme, with inspections along the way and a completion certificate at the end.
Questions about structural alterations in Bideford
Do I need building regulations approval?
Yes. Removing a load-bearing wall is building work that needs approval, with calculations for the beam.
How do I know if a wall is load-bearing?
Only a survey can confirm it. Walls that carry floor joists, roof loads or walls above are load-bearing. We check on site and the engineer confirms.
Can the beam be hidden?
Often, by setting it within the ceiling depth. It depends on the joists and span.
How much does a structural alteration cost in Bideford?
In Bideford, a structural alteration typically costs £4,500–£9,750 for a typical knock-through with steel beam, including VAT at 20% (standard rate). Your fixed price depends on the survey and drawings.
Do you build structural alterations in Bideford?
Yes. We build structural alterations across Bideford, including postcodes EX39. Every project starts with a free home visit.