What is a structural alteration?
A structural alteration changes how a house carries its loads, most often by removing a load-bearing wall and replacing it with a steel beam. It is how kitchens and dining rooms become open-plan, and how extensions are joined to the original house.
How much does a structural alteration cost in Ely?
In Ely, a structural alteration typically costs £4,750–£10,000 for a typical knock-through with steel beam, including VAT at 20% (standard rate). We start from a UK-wide guide and adjust it for the East of England, where labour and materials are typically about 6% above average. Design, structural calculations and council fees are extra.
| Size or type | Guide range |
|---|---|
| A typical knock-through with steel beam | £4,750–£10,000 |
| Higher specification | £10,000–£12,500 |
The biggest cost drivers are:
- What sits above the wall
- Party wall involvement
- Floor and ceiling repairs
- Flush or downstand beam
A guide range is only a starting point: the guide price tool gives an instant figure for your size, and a free survey turns it into a fixed quote.
Do you need planning permission for a structural alteration in Ely?
Approvals for a structural alteration in Ely follow the rules for England. In England removing a load-bearing wall does not need planning permission but does need building regulations approval with an engineer’s calculations. If the beam bears on a party wall, a party wall notice must be served.
Building regulations approval comes from the council’s building control service or a registered building control approver. The work is inspected at key stages, such as foundations, drainage and insulation, and a completion certificate is issued at the end.
We check this for your address before design work starts, so there are no surprises later.
What we handle
From survey to sign-off, the job normally involves:
- Structural engineer’s calculations and drawings
- Party wall notices where needed
- Building control application
- Temporary propping
- Building control sign-off
- Making good, plastering and flooring repairs
How long does it take?
Allow 1 to 2 weeks on site for a typical knock-through. Before that, surveys, drawings and approvals usually take 6 to 12 weeks, longer if the council asks for changes.
Building in Ely
Many towns in the East of England have estates built since the 1970s, where garage conversions and rear extensions are popular.
Projects in Ely (CB7) are surveyed in person before we quote, so the price reflects your actual property.
How it works
- 01
Free visit
We look at the property, talk through what you want and measure up. There is no charge and no obligation.
- 02
Drawings and written quote
We prepare the design and give you a written, itemised quote with inclusions and exclusions.
- 03
Approvals
Planning or permitted development confirmation, building regulations and any party wall matters.
- 04
Construction and completion
We build, put right any snags and hand over the building control certificate.
Questions about structural alterations in Ely
What fire protection does a steel need?
Usually fire-rated plasterboard or intumescent paint, as building control requires.
How do I know if a wall is load-bearing?
Only a survey can confirm it. Walls that carry floor joists, roof loads or walls above are load-bearing. We check on site and the engineer confirms.
How much does a structural alteration cost in Ely?
In Ely, a structural alteration typically costs £4,750–£10,000 for a typical knock-through with steel beam, including VAT at 20% (standard rate). Your fixed price depends on the survey and drawings.
Who approves a structural alteration in Ely?
Planning matters in Ely go to the council covering your address, and the work needs building control approval. We prepare and submit the applications for you.
Do I need a party wall notice?
In England and Wales, if the beam sits in a party wall, yes.