What is a structural alteration?
A structural alteration changes how a house carries its loads, most often by removing a load-bearing wall and replacing it with a steel beam. It is how kitchens and dining rooms become open-plan, and how extensions are joined to the original house.
How much does a structural alteration cost in Melksham?
In Melksham, a structural alteration typically costs £4,500–£9,750 for a typical knock-through with steel beam, including VAT at 20% (standard rate). Building costs in the South West are close to the UK average, so the figures for Melksham are close to our national guide. Design, structural calculations and council fees are extra.
| Size or type | Guide range |
|---|---|
| A typical knock-through with steel beam | £4,500–£9,750 |
| Higher specification | £9,750–£12,000 |
Your quote will depend mainly on:
- Moving radiators, sockets and pipes
- Span of the opening
- What sits above the wall
- Party wall involvement
A guide range is only a starting point: the guide price tool gives an instant figure for your size, and a free survey turns it into a fixed quote.
Do you need planning permission for a structural alteration in Melksham?
Before anything is built in Melksham, we confirm which approvals apply in England. In England removing a load-bearing wall does not need planning permission but does need building regulations approval with an engineer’s calculations. If the beam bears on a party wall, a party wall notice must be served.
Building regulations approval comes from the council’s building control service or a registered building control approver. The work is inspected at key stages, such as foundations, drainage and insulation, and a completion certificate is issued at the end.
Our first visit includes a check of your planning history, so you know the route before paying for drawings.
What we handle
The work we manage on a structural alteration:
- Steel beam supply and installation on padstones
- Building control sign-off
- Making good, plastering and flooring repairs
- Building control application
- Party wall notices where needed
- Fire protection to the steel
How long does it take?
Allow 1 to 2 weeks on site for a typical knock-through. Design and approvals come first and typically take 6 to 12 weeks, depending on the approval route.
Building in Melksham
The South West mixes stone and render cottages with post-war and newer estates, and local materials matter more here when matching an extension.
Melksham sits in Wiltshire, about 5 miles north-east of Trowbridge. We cover the whole of Melksham, including postcodes SN12.
How it works
- 01
Visit and measured survey
A free visit to understand the project, check access and take measurements.
- 02
Drawings and written quote
We prepare the design and give you a written, itemised quote with inclusions and exclusions.
- 03
Approvals in place
We handle planning, building control and neighbour notices before work starts.
- 04
Construction and completion
We build, put right any snags and hand over the building control certificate.
Questions about structural alterations in Melksham
What fire protection does a steel need?
Usually fire-rated plasterboard or intumescent paint, as building control requires.
How much does a structural alteration cost in Melksham?
In Melksham, a structural alteration typically costs £4,500–£9,750 for a typical knock-through with steel beam, including VAT at 20% (standard rate). Your fixed price depends on the survey and drawings.
Do I need a party wall notice?
In England and Wales, if the beam sits in a party wall, yes.
Who approves a structural alteration in Melksham?
Planning matters in Melksham go to the council covering your address, and the work needs building control approval. We prepare and submit the applications for you.
Can the beam be hidden?
Often, by setting it within the ceiling depth. It depends on the joists and span.