What is a structural alteration?
A structural alteration changes how a house carries its loads, most often by removing a load-bearing wall and replacing it with a steel beam. It is how kitchens and dining rooms become open-plan, and how extensions are joined to the original house.
How much does a structural alteration cost in Tyne and Wear?
In Tyne and Wear, a structural alteration typically costs £4,000–£8,500 for a typical knock-through with steel beam, including VAT at 20% (standard rate). We start from a UK-wide guide and adjust it for the North East, where labour and materials are typically about 10% below average. Design, structural calculations and council fees are extra.
| Size or type | Guide range |
|---|---|
| A typical knock-through with steel beam | £4,000–£8,500 |
| Higher specification | £8,500–£10,500 |
Your quote will depend mainly on:
- Span of the opening
- Party wall involvement
- Floor and ceiling repairs
- What sits above the wall
A guide range is only a starting point: the guide price tool gives an instant figure for your size, and a free survey turns it into a fixed quote.
Do you need planning permission for a structural alteration in Tyne and Wear?
Here is how the rules work for a structural alteration in England. In England removing a load-bearing wall does not need planning permission but does need building regulations approval with an engineer’s calculations. If the beam bears on a party wall, a party wall notice must be served.
Building regulations approval comes from the council’s building control service or a registered building control approver. The work is inspected at key stages, such as foundations, drainage and insulation, and a completion certificate is issued at the end.
Our first visit includes a check of your planning history, so you know the route before paying for drawings.
What we handle
Handled as part of most structural alterations:
- Making good, plastering and flooring repairs
- Party wall notices where needed
- Structural engineer’s calculations and drawings
- Fire protection to the steel
- Steel beam supply and installation on padstones
- Building control sign-off
How long does it take?
Expect 1 to 2 weeks on site for a typical knock-through. Design and approvals come first and typically take 6 to 12 weeks, depending on the approval route.
Building in Tyne and Wear
Across the North East, colliery-era terraces and newer estates sit side by side, so the right project depends on the house type.
Towns we cover in Tyne and Wear include Newcastle upon Tyne, Sunderland, South Shields, Gateshead, Washington and Tynemouth.
How it works
- 01
Survey and brief
We visit, discuss your ideas and budget, and survey the property or site at no cost.
- 02
Design and pricing
Design options, then a fixed quote based on the chosen drawings and specification.
- 03
Permissions sorted
Applications, building control and neighbour arrangements, all before the start date.
- 04
Construction and completion
We build, put right any snags and hand over the building control certificate.
Questions about structural alterations in Tyne and Wear
Do I need a party wall notice?
In England and Wales, if the beam sits in a party wall, yes.
How long does a structural alteration take in Tyne and Wear?
Typically 1 to 2 weeks on site for a typical knock-through. Design and approvals beforehand usually take 6 to 12 weeks.
What fire protection does a steel need?
Usually fire-rated plasterboard or intumescent paint, as building control requires.
Can the beam be hidden?
Often, by setting it within the ceiling depth. It depends on the joists and span.
How much does a structural alteration cost in Tyne and Wear?
In Tyne and Wear, a structural alteration typically costs £4,000–£8,500 for a typical knock-through with steel beam, including VAT at 20% (standard rate). Your fixed price depends on the survey and drawings.