What is a structural alteration?
A structural alteration changes how a house carries its loads, most often by removing a load-bearing wall and replacing it with a steel beam. It is how kitchens and dining rooms become open-plan, and how extensions are joined to the original house.
How much does a structural alteration cost in Wigan?
In Wigan, a structural alteration typically costs £4,250–£9,000 for a typical knock-through with steel beam, including VAT at 20% (standard rate). The guide for Wigan reflects typical costs in the North West, roughly 6% below the UK-wide figure. Design, structural calculations and council fees are extra.
| Size or type | Guide range |
|---|---|
| A typical knock-through with steel beam | £4,250–£9,000 |
| Higher specification | £9,000–£11,000 |
What moves the price most:
- Span of the opening
- Flush or downstand beam
- What sits above the wall
- Moving radiators, sockets and pipes
A guide range is only a starting point: the guide price tool gives an instant figure for your size, and a free survey turns it into a fixed quote.
Do you need planning permission for a structural alteration in Wigan?
Whether you need planning permission depends on your house and its location in England. In England removing a load-bearing wall does not need planning permission but does need building regulations approval with an engineer’s calculations. If the beam bears on a party wall, a party wall notice must be served.
Building regulations approval comes from the council’s building control service or a registered building control approver. The work is inspected at key stages, such as foundations, drainage and insulation, and a completion certificate is issued at the end.
If the answer is not clear-cut, we can apply for formal confirmation before you commit to the build.
What we handle
What we take care of:
- Steel beam supply and installation on padstones
- Party wall notices where needed
- Structural engineer’s calculations and drawings
- Making good, plastering and flooring repairs
- Fire protection to the steel
- Building control sign-off
How long does it take?
The build itself usually takes 1 to 2 weeks on site for a typical knock-through. Allow time beforehand for drawings and approvals, usually 6 to 12 weeks.
Building in Wigan
Terraced streets across the North West often suit rear dormers and single-storey kitchen extensions.
If your home is in Wigan or close by in Hindley, Ashton in Makerfield and Westhoughton, a free home visit is the first step.
How it works
- 01
Survey and brief
We visit, discuss your ideas and budget, and survey the property or site at no cost.
- 02
Drawings and written quote
We prepare the design and give you a written, itemised quote with inclusions and exclusions.
- 03
Permissions sorted
Applications, building control and neighbour arrangements, all before the start date.
- 04
Build and handover
Work follows the agreed programme, with inspections along the way and a completion certificate at the end.
Questions about structural alterations in Wigan
Do I need building regulations approval?
Yes. Removing a load-bearing wall is building work that needs approval, with calculations for the beam.
Do I need a party wall notice?
In England and Wales, if the beam sits in a party wall, yes.
Who approves a structural alteration in Wigan?
Planning matters in Wigan go to the council covering your address, and the work needs building control approval. We prepare and submit the applications for you.
How much does a structural alteration cost in Wigan?
In Wigan, a structural alteration typically costs £4,250–£9,000 for a typical knock-through with steel beam, including VAT at 20% (standard rate). Your fixed price depends on the survey and drawings.
What fire protection does a steel need?
Usually fire-rated plasterboard or intumescent paint, as building control requires.