What is a wraparound extension?
A wraparound extension combines a side return and a rear extension into one L-shaped addition. It gives the largest possible ground floor, often creating an open-plan kitchen, dining and living space across the whole width of the house.
How much does a wraparound extension cost in Bishop Auckland?
In Bishop Auckland, a wraparound extension typically costs £2,000–£2,900 per m² of floor area, including VAT at 20% (standard rate). For a typical 28 m² project that is roughly £56,000–£81,000. We start from a UK-wide guide and adjust it for the North East, where labour and materials are typically about 10% below average. Design, structural calculations and council fees are extra.
| Size or type | Guide range |
|---|---|
| Smaller project (20 m²) | £40,000–£58,000 |
| Typical project (28 m²) | £56,000–£81,000 |
| Larger project (39 m²) | £78,000–£113,000 |
| Rate per m² | £2,000–£2,900 |
Your quote will depend mainly on:
- Access for materials on terraced streets
- Party wall surveyor fees for one or both neighbours
- Kitchen and flooring specification
- Total footprint and the amount of glazing
A guide range is only a starting point: the guide price tool gives an instant figure for your size, and a free survey turns it into a fixed quote.
Do you need planning permission for a wraparound extension in Bishop Auckland?
Before anything is built in Bishop Auckland, we confirm which approvals apply in England. In England a wraparound extension combines side and rear elements, which normally takes it outside permitted development, so a householder planning application is made.
Where work involves a shared wall, building on the boundary, or digging foundations within 3 metres of a neighbour’s building and deeper than its foundations (or within 6 metres for deeper work), the Party Wall etc. Act 1996 applies and notices must be served before work starts.
We check this for your address before design work starts, so there are no surprises later.
What we handle
Handled as part of most wraparound extensions:
- Underfloor heating option, electrics and plastering
- Building control completion
- Party wall notices and surveyor liaison
- Walls, roof and glazing
- Structural engineer’s design for steels and supports
- Foundations and drainage
How long does it take?
The build itself usually takes 12 to 18 weeks on site. Allow time beforehand for drawings and approvals, usually 3 to 4 months.
Building in Bishop Auckland
The North East has many terraced streets and post-war semis, where rear extensions and loft conversions are popular ways to gain space.
Projects in Bishop Auckland (DL14) are surveyed in person before we quote, so the price reflects your actual property.
How it works
- 01
Survey and brief
We visit, discuss your ideas and budget, and survey the property or site at no cost.
- 02
Drawings and written quote
We prepare the design and give you a written, itemised quote with inclusions and exclusions.
- 03
Permissions sorted
Applications, building control and neighbour arrangements, all before the start date.
- 04
Build and sign-off
We run the build to a written programme and hand over the completion certificate.
Questions about wraparound extensions in Bishop Auckland
Can we keep a separate living room?
Yes. Many clients keep the front room separate and open up only the back of the house.
Who approves a wraparound extension in Bishop Auckland?
Planning matters in Bishop Auckland go to the council covering your address, and the work needs building control approval. We prepare and submit the applications for you.
Will both neighbours be affected?
Usually only the neighbour on the side return side, but rear foundations near either boundary can trigger party wall notices.
How long does it take to build?
Around 12 to 18 weeks on site after approvals. Design, planning and party wall matters usually take 3 to 4 months beforehand.
How much does a wraparound extension cost in Bishop Auckland?
In Bishop Auckland, a wraparound extension typically costs £2,000–£2,900 per m² of floor area, including VAT at 20% (standard rate). A typical 28 m² project comes to roughly £56,000–£81,000. Your fixed price depends on the survey and drawings.