What is a wraparound extension?
A wraparound extension combines a side return and a rear extension into one L-shaped addition. It gives the largest possible ground floor, often creating an open-plan kitchen, dining and living space across the whole width of the house.
How much does a wraparound extension cost in Cirencester?
In Cirencester, a wraparound extension typically costs £2,250–£3,250 per m² of floor area, including VAT at 20% (standard rate). For a typical 28 m² project that is roughly £63,000–£91,000. Building costs in the South West are close to the UK average, so the figures for Cirencester are close to our national guide. Design, structural calculations and council fees are extra.
| Size or type | Guide range |
|---|---|
| Smaller project (20 m²) | £45,000–£65,000 |
| Typical project (28 m²) | £63,000–£91,000 |
| Larger project (39 m²) | £88,000–£127,000 |
| Rate per m² | £2,250–£3,250 |
Your quote will depend mainly on:
- Drainage changes
- Party wall surveyor fees for one or both neighbours
- Access for materials on terraced streets
- Kitchen and flooring specification
For a figure based on your own measurements, try the guide price tool, then book a free home visit for a fixed quote.
Do you need planning permission for a wraparound extension in Cirencester?
Whether you need planning permission depends on your house and its location in England. In England a wraparound extension combines side and rear elements, which normally takes it outside permitted development, so a householder planning application is made.
Where work involves a shared wall, building on the boundary, or digging foundations within 3 metres of a neighbour’s building and deeper than its foundations (or within 6 metres for deeper work), the Party Wall etc. Act 1996 applies and notices must be served before work starts.
We check this for your address before design work starts, so there are no surprises later.
What we handle
What we take care of:
- Design and planning application
- Foundations and drainage
- Party wall notices and surveyor liaison
- Building control completion
- Removal of internal and external walls
- Walls, roof and glazing
How long does it take?
Allow 12 to 18 weeks on site. Design and approvals come first and typically take 3 to 4 months, depending on the approval route.
Building in Cirencester
The South West mixes stone and render cottages with post-war and newer estates, and local materials matter more here when matching an extension.
Cirencester sits in Gloucestershire, about 15 miles south-east of Gloucester. We cover the whole of Cirencester, including postcodes GL7.
How it works
- 01
Visit and measured survey
A free visit to understand the project, check access and take measurements.
- 02
Design and fixed quote
Drawings, structural calculations and an itemised, fixed price for the agreed specification.
- 03
Permissions sorted
Applications, building control and neighbour arrangements, all before the start date.
- 04
Build and handover
Work follows the agreed programme, with inspections along the way and a completion certificate at the end.
Questions about wraparound extensions in Cirencester
What about the old back addition?
The side wall of the back addition is usually removed and replaced with a steel beam, so the old kitchen joins the new space.
Is a wraparound worth it?
It gives the biggest ground-floor space without going upwards. Whether it adds value depends on your street and house, so we suggest checking local sale prices before committing.
How much does a wraparound extension cost in Cirencester?
In Cirencester, a wraparound extension typically costs £2,250–£3,250 per m² of floor area, including VAT at 20% (standard rate). A typical 28 m² project comes to roughly £63,000–£91,000. Your fixed price depends on the survey and drawings.
Will both neighbours be affected?
Usually only the neighbour on the side return side, but rear foundations near either boundary can trigger party wall notices.
Who approves a wraparound extension in Cirencester?
Planning matters in Cirencester go to the council covering your address, and the work needs building control approval. We prepare and submit the applications for you.