What is a wraparound extension?
A wraparound extension combines a side return and a rear extension into one L-shaped addition. It gives the largest possible ground floor, often creating an open-plan kitchen, dining and living space across the whole width of the house.
How much does a wraparound extension cost in Wrexham?
In Wrexham, a wraparound extension typically costs £2,000–£2,950 per m² of floor area, including VAT at 20% (standard rate). For a typical 28 m² project that is roughly £56,000–£82,500. That range is adjusted for Wales, where domestic building work typically costs around 8% below the national average. Design, structural calculations and council fees are extra.
| Size or type | Guide range |
|---|---|
| Smaller project (20 m²) | £40,000–£59,000 |
| Typical project (28 m²) | £56,000–£82,500 |
| Larger project (39 m²) | £78,000–£115,000 |
| Rate per m² | £2,000–£2,950 |
The biggest cost drivers are:
- Drainage changes
- Steelwork and propping of the existing house
- Party wall surveyor fees for one or both neighbours
- Kitchen and flooring specification
A guide range is only a starting point: the guide price tool gives an instant figure for your size, and a free survey turns it into a fixed quote.
Do you need planning permission for a wraparound extension in Wrexham?
Before anything is built in Wrexham, we confirm which approvals apply in Wales. In Wales a wraparound extension combines side and rear elements; it can only be permitted development if each part meets the limits, so many need a householder planning application.
The Party Wall etc. Act 1996 applies in Wales, so notices must be served before work on a shared wall, on the boundary, or excavation close to a neighbour’s foundations.
Our first visit includes a check of your planning history, so you know the route before paying for drawings.
What we handle
The work we manage on a wraparound extension:
- Removal of internal and external walls
- Walls, roof and glazing
- Structural engineer’s design for steels and supports
- Party wall notices and surveyor liaison
- Foundations and drainage
- Building control completion
How long does it take?
Build time is typically 12 to 18 weeks on site. Design and approvals come first and typically take 3 to 4 months, depending on the approval route.
Building in Wrexham
Wales has many terraced valley streets, stone cottages and post-war estates, so extension designs are shaped by slopes, materials and local character.
Wrexham sits in Clwyd. We cover the whole of Wrexham, including postcodes LL13.
How it works
- 01
Survey and brief
We visit, discuss your ideas and budget, and survey the property or site at no cost.
- 02
Design and pricing
Design options, then a fixed quote based on the chosen drawings and specification.
- 03
Approvals in place
We handle planning, building control and neighbour notices before work starts.
- 04
Construction and completion
We build, put right any snags and hand over the building control certificate.
Questions about wraparound extensions in Wrexham
Do I need planning permission for a wraparound extension in Wrexham?
In Wales a wraparound extension combines side and rear elements; it can only be permitted development if each part meets the limits, so many need a householder planning application.
How long does a wraparound extension take in Wrexham?
Typically 12 to 18 weeks on site. Design and approvals beforehand usually take 3 to 4 months.
How much does a wraparound extension cost in Wrexham?
In Wrexham, a wraparound extension typically costs £2,000–£2,950 per m² of floor area, including VAT at 20% (standard rate). A typical 28 m² project comes to roughly £56,000–£82,500. Your fixed price depends on the survey and drawings.
Is a wraparound worth it?
It gives the biggest ground-floor space without going upwards. Whether it adds value depends on your street and house, so we suggest checking local sale prices before committing.
Can we keep a separate living room?
Yes. Many clients keep the front room separate and open up only the back of the house.
What about the old back addition?
The side wall of the back addition is usually removed and replaced with a steel beam, so the old kitchen joins the new space.