What is a wraparound extension?
A wraparound extension combines a side return and a rear extension into one L-shaped addition. It gives the largest possible ground floor, often creating an open-plan kitchen, dining and living space across the whole width of the house.
How much does a wraparound extension cost in Deeside?
In Deeside, a wraparound extension typically costs £2,000–£2,950 per m² of floor area, including VAT at 20% (standard rate). For a typical 28 m² project that is roughly £56,000–£82,500. That range is adjusted for Wales, where domestic building work typically costs around 8% below the national average. Design, structural calculations and council fees are extra.
| Size or type | Guide range |
|---|---|
| Smaller project (20 m²) | £40,000–£59,000 |
| Typical project (28 m²) | £56,000–£82,500 |
| Larger project (39 m²) | £78,000–£115,000 |
| Rate per m² | £2,000–£2,950 |
What moves the price most:
- Drainage changes
- Steelwork and propping of the existing house
- Total footprint and the amount of glazing
- Access for materials on terraced streets
For a figure based on your own measurements, try the guide price tool, then book a free home visit for a fixed quote.
Do you need planning permission for a wraparound extension in Deeside?
The approval route for Deeside is set by planning law in Wales. In Wales a wraparound extension combines side and rear elements; it can only be permitted development if each part meets the limits, so many need a householder planning application.
The Party Wall etc. Act 1996 applies in Wales, so notices must be served before work on a shared wall, on the boundary, or excavation close to a neighbour’s foundations.
If the answer is not clear-cut, we can apply for formal confirmation before you commit to the build.
What we handle
Handled as part of most wraparound extensions:
- Removal of internal and external walls
- Party wall notices and surveyor liaison
- Foundations and drainage
- Underfloor heating option, electrics and plastering
- Design and planning application
- Building control completion
How long does it take?
Build time is typically 12 to 18 weeks on site. Allow time beforehand for drawings and approvals, usually 3 to 4 months.
Building in Deeside
Terraced houses in Welsh towns often have narrow plots, which suits rear and side return extensions and rear dormers.
Deeside sits in Clwyd, about 11 miles north of Wrexham. We cover the whole of Deeside, including postcodes CH5.
How it works
- 01
Survey and brief
We visit, discuss your ideas and budget, and survey the property or site at no cost.
- 02
Design and fixed quote
Drawings, structural calculations and an itemised, fixed price for the agreed specification.
- 03
Approvals in place
We handle planning, building control and neighbour notices before work starts.
- 04
Build and sign-off
We run the build to a written programme and hand over the completion certificate.
Questions about wraparound extensions in Deeside
What about the old back addition?
The side wall of the back addition is usually removed and replaced with a steel beam, so the old kitchen joins the new space.
Do I need planning permission for a wraparound extension in Deeside?
In Wales a wraparound extension combines side and rear elements; it can only be permitted development if each part meets the limits, so many need a householder planning application.
Will both neighbours be affected?
Usually only the neighbour on the side return side, but rear foundations near either boundary can trigger party wall notices.
How long does it take to build?
Around 12 to 18 weeks on site after approvals. Design, planning and party wall matters usually take 3 to 4 months beforehand.
Who approves a wraparound extension in Deeside?
Planning matters in Deeside go to the council covering your address, and the work needs building control approval. We prepare and submit the applications for you.
How much does a wraparound extension cost in Deeside?
In Deeside, a wraparound extension typically costs £2,000–£2,950 per m² of floor area, including VAT at 20% (standard rate). A typical 28 m² project comes to roughly £56,000–£82,500. Your fixed price depends on the survey and drawings.