What is a set of architectural drawings?
Architectural design turns your ideas into drawings that a council and a builder can work from. It starts with a measured survey of the house, then design options, planning drawings and, once approved, detailed building regulations drawings and specifications.
How much does a set of architectural drawings cost in Armagh?
In Armagh, a set of architectural drawings typically costs £1,250–£3,750 for planning and building regulations drawings for a typical extension, including VAT at 20% (standard rate). We start from a UK-wide guide and adjust it for Northern Ireland, where labour and materials are typically about 14% below average. Council application fees are extra.
| Size or type | Guide range |
|---|---|
| Planning and building regulations drawings for a typical extension | £1,250–£3,750 |
| Larger or more complex projects | £3,750–£4,750 |
The biggest cost drivers are:
- Structural engineer’s fees
- Measured survey complexity
- 3D visuals
- Number of design options
Your exact price depends on the survey and drawings. The guide price tool gives a quick range in the meantime.
Planning and building regulations in Armagh
Here is how the rules work for a set of architectural drawings in Northern Ireland. In Northern Ireland drawings are prepared for the council’s planning service and building control.
Northern Ireland has no Party Wall Act. Work on shared walls relies on agreement with the neighbour and common law, so we agree the arrangements in writing before work starts.
We check this for your address before design work starts, so there are no surprises later.
What we handle
Handled as part of most architectural drawings:
- 3D views on request
- Written agreement with neighbours on shared walls
- Design options and sketch layouts
- Building regulations drawings and specification
- Tender-ready drawing pack
- Structural calculations coordinated
How long does it take?
Allow 2 to 6 weeks for drawings, depending on complexity. If the drawings are for a planning application, add the council’s decision period once they are submitted.
Building in Armagh
Northern Ireland has many detached and semi-detached homes on generous plots, which suits single-storey rear extensions and garage conversions.
We work across Armagh and neighbouring areas such as Portadown, Dungannon and Craigavon. Postcodes we cover in Armagh include BT60 and BT61.
How it works
- 01
Measured survey
We visit and measure the house so the drawings start from accurate information.
- 02
Concept design
Options for layout and appearance, revised until you are happy.
- 03
Application drawings
Plans, elevations and supporting documents prepared for the council.
- 04
Approval
We follow the application through to a decision and pass on the approved drawings.
Questions about architectural drawings in Armagh
Do you prepare architectural drawings in Armagh?
Yes. We prepare architectural drawings across Armagh, including postcodes BT60 and BT61. Every project starts with a free home visit.
How long do drawings take?
Typically 2 to 6 weeks from survey, depending on revisions.
Can I use the drawings with another builder?
Yes. Drawings you pay for are yours to use for the project.
What drawings are needed for planning?
Usually existing and proposed floor plans and elevations, a block plan and a location plan. Some councils need more.
How much does a set of architectural drawings cost in Armagh?
In Armagh, a set of architectural drawings typically costs £1,250–£3,750 for planning and building regulations drawings for a typical extension, including VAT at 20% (standard rate). Your fixed price depends on the survey and drawings.