What is a set of architectural drawings?
Architectural design turns your ideas into drawings that a council and a builder can work from. It starts with a measured survey of the house, then design options, planning drawings and, once approved, detailed building regulations drawings and specifications.
How much does a set of architectural drawings cost in Ashford, Surrey?
In Ashford, a set of architectural drawings typically costs £1,750–£5,000 for planning and building regulations drawings for a typical extension, including VAT at 20% (standard rate). Building costs in the South East run about 12% above the UK average, and the figures for Ashford are adjusted to reflect that. Council application fees are extra.
| Size or type | Guide range |
|---|---|
| Planning and building regulations drawings for a typical extension | £1,750–£5,000 |
| Larger or more complex projects | £5,000–£6,250 |
Your quote will depend mainly on:
- Structural engineer’s fees
- 3D visuals
- Number of design options
- Project size and complexity
A guide range is only a starting point: the guide price tool gives an instant figure for your size, and a free survey turns it into a fixed quote.
Planning and building regulations in Ashford, Surrey
Whether you need planning permission depends on your house and its location in England. In England drawings are prepared to suit the local planning authority’s validation list and, later, building control.
Where work involves a shared wall, building on the boundary, or digging foundations within 3 metres of a neighbour’s building and deeper than its foundations (or within 6 metres for deeper work), the Party Wall etc. Act 1996 applies and notices must be served before work starts.
Our first visit includes a check of your planning history, so you know the route before paying for drawings.
What we handle
From survey to sign-off, the job normally involves:
- Structural calculations coordinated
- Tender-ready drawing pack
- Planning drawings: plans, elevations, site and location plans
- Building regulations drawings and specification
- Measured survey of the existing house
- Design options and sketch layouts
How long does it take?
Allow 2 to 6 weeks for drawings, depending on complexity. If the drawings are for a planning application, add the council’s decision period once they are submitted.
Building in Ashford, Surrey
The South East has a broad mix of housing, from Victorian terraces in the towns to post-war semis and newer estates, so extension types vary street by street.
We work across Ashford and neighbouring areas such as Staines, Feltham and Sunbury-on-Thames. Postcodes we cover in Ashford include TW15.
How it works
- 01
Measured survey
We visit and measure the house so the drawings start from accurate information.
- 02
Concept design
Options for layout and appearance, revised until you are happy.
- 03
Application drawings
Plans, elevations and supporting documents prepared for the council.
- 04
Approval
We follow the application through to a decision and pass on the approved drawings.
Questions about architectural drawings in Ashford, Surrey
What drawings are needed for planning?
Usually existing and proposed floor plans and elevations, a block plan and a location plan. Some councils need more.
How much does a set of architectural drawings cost in Ashford?
In Ashford, a set of architectural drawings typically costs £1,750–£5,000 for planning and building regulations drawings for a typical extension, including VAT at 20% (standard rate). Your fixed price depends on the survey and drawings.
Can I use the drawings with another builder?
Yes. Drawings you pay for are yours to use for the project.
How long do drawings take?
Typically 2 to 6 weeks from survey, depending on revisions.
Do you prepare architectural drawings in Ashford?
Yes. We prepare architectural drawings across Ashford, including postcodes TW15. Every project starts with a free home visit.