What is a basement conversion?
A basement conversion turns an existing cellar into living space, or excavates a new basement under the house or garden. Waterproofing, structural support and daylight are the main design challenges.
How much does a basement conversion cost in Highgate?
In Highgate, a basement conversion typically costs £2,450–£4,150 per m² for converting an existing cellar, including VAT at 20% (standard rate). For a typical 30 m² project that is roughly £73,500–£124,500. That range is adjusted for London, where domestic building work typically costs around 30% above the national average. Design, structural calculations and council fees are extra.
| Size or type | Guide range |
|---|---|
| Smaller project (21 m²) | £51,500–£87,000 |
| Typical project (30 m²) | £73,500–£124,500 |
| Larger project (42 m²) | £103,000–£174,500 |
| Rate per m² | £2,450–£4,150 |
Your quote will depend mainly on:
- Ground water and access
- Party wall surveyor fees
- Waterproofing system
- Lightwells
Use the guide price tool to see how size and specification change the figure, then ask for a written, itemised quote.
Do you need planning permission for a basement conversion in Highgate?
Before anything is built in Highgate, we confirm which approvals apply in England. In England converting an existing cellar with no external change usually does not need planning permission. New excavation, lightwells and changes to the front often do, and some councils, particularly in London, have specific basement policies.
Building regulations approval comes from the council’s building control service or a registered building control approver. The work is inspected at key stages, such as foundations, drainage and insulation, and a completion certificate is issued at the end.
At the survey we check your house’s planning history and any restrictions, and tell you which route applies.
What we handle
Handled as part of most basement conversions:
- Building control sign-off
- Insulation, ventilation and drainage pumps
- Lightwells and windows
- Waterproofing design (tanking or cavity drain membrane)
- Underpinning or new structure where needed
- Party wall notices
How long does it take?
Allow 8 to 16 weeks for a cellar conversion; longer for new excavation. Before that, surveys, drawings and approvals usually take 3 to 5 months, longer if the council asks for changes.
Building in Highgate
Space is at a premium in London, so homeowners often build out into the side return or up into the roof rather than move.
Projects in Highgate (N6) are surveyed in person before we quote, so the price reflects your actual property.
How it works
- 01
Free visit
We look at the property, talk through what you want and measure up. There is no charge and no obligation.
- 02
Design and pricing
Design options, then a fixed quote based on the chosen drawings and specification.
- 03
Approvals
Planning or permitted development confirmation, building regulations and any party wall matters.
- 04
Build and sign-off
We run the build to a written programme and hand over the completion certificate.
Questions about basement conversions in Highgate
How do you keep a basement dry?
With a waterproofing system designed to BS 8102, typically a cavity drain membrane with a sump pump, or a tanking system.
Can a basement be a bedroom?
Yes, with a suitable escape route such as a lightwell window or protected stair.
How much does a basement conversion cost in Highgate?
In Highgate, a basement conversion typically costs £2,450–£4,150 per m² for converting an existing cellar, including VAT at 20% (standard rate). A typical 30 m² project comes to roughly £73,500–£124,500. Your fixed price depends on the survey and drawings.
Do I need party wall agreements?
In England and Wales, excavating near a neighbour’s foundations usually triggers the Party Wall etc. Act 1996.
How long does a basement conversion take in Highgate?
Typically 8 to 16 weeks for a cellar conversion; longer for new excavation. Design and approvals beforehand usually take 3 to 5 months.