What is a basement conversion?
A basement conversion turns an existing cellar into living space, or excavates a new basement under the house or garden. Waterproofing, structural support and daylight are the main design challenges.
How much does a basement conversion cost in Kent?
In Kent, a basement conversion typically costs £2,150–£3,600 per m² for converting an existing cellar, including VAT at 20% (standard rate). For a typical 30 m² project that is roughly £64,500–£108,000. We start from a UK-wide guide and adjust it for the South East, where labour and materials are typically about 12% above average. Design, structural calculations and council fees are extra.
| Size or type | Guide range |
|---|---|
| Smaller project (21 m²) | £45,000–£75,500 |
| Typical project (30 m²) | £64,500–£108,000 |
| Larger project (42 m²) | £90,500–£151,000 |
| Rate per m² | £2,150–£3,600 |
What moves the price most:
- Ground water and access
- Existing cellar or new excavation
- Lightwells
- Waterproofing system
Use the guide price tool to see how size and specification change the figure, then ask for a written, itemised quote.
Do you need planning permission for a basement conversion in Kent?
The approval route for Kent is set by planning law in England. In England converting an existing cellar with no external change usually does not need planning permission. New excavation, lightwells and changes to the front often do, and some councils, particularly in London, have specific basement policies.
Where work involves a shared wall, building on the boundary, or digging foundations within 3 metres of a neighbour’s building and deeper than its foundations (or within 6 metres for deeper work), the Party Wall etc. Act 1996 applies and notices must be served before work starts.
We check this for your address before design work starts, so there are no surprises later.
What we handle
From survey to sign-off, the job normally involves:
- Insulation, ventilation and drainage pumps
- Electrics, heating and plastering
- Building control sign-off
- Party wall notices
- Structural and ground survey
- Underpinning or new structure where needed
How long does it take?
The build itself usually takes 8 to 16 weeks for a cellar conversion; longer for new excavation. Allow time beforehand for drawings and approvals, usually 3 to 5 months.
Building in Kent
Commuter towns across the South East have many 1930s and post-war semis that suit rear extensions and hip-to-gable loft conversions.
Towns we cover in Kent include St Peters, Maidstone, Gillingham, Chatham, Tunbridge Wells and Folkestone.
How it works
- 01
Free visit
We look at the property, talk through what you want and measure up. There is no charge and no obligation.
- 02
Drawings and written quote
We prepare the design and give you a written, itemised quote with inclusions and exclusions.
- 03
Permissions sorted
Applications, building control and neighbour arrangements, all before the start date.
- 04
Construction and completion
We build, put right any snags and hand over the building control certificate.
Questions about basement conversions in Kent
Can a basement be a bedroom?
Yes, with a suitable escape route such as a lightwell window or protected stair.
How do you keep a basement dry?
With a waterproofing system designed to BS 8102, typically a cavity drain membrane with a sump pump, or a tanking system.
Do you build basement conversions in Kent?
Yes. We build basement conversions across Kent, including postcodes BR8, CT1, CT10, CT11 and CT12. Every project starts with a free home visit.
How much does a basement conversion cost in Kent?
In Kent, a basement conversion typically costs £2,150–£3,600 per m² for converting an existing cellar, including VAT at 20% (standard rate). A typical 30 m² project comes to roughly £64,500–£108,000. Your fixed price depends on the survey and drawings.
Do I need party wall agreements?
In England and Wales, excavating near a neighbour’s foundations usually triggers the Party Wall etc. Act 1996.