What is a basement conversion?
A basement conversion turns an existing cellar into living space, or excavates a new basement under the house or garden. Waterproofing, structural support and daylight are the main design challenges.
How much does a basement conversion cost in Kingston upon Thames?
In Kingston upon Thames, a basement conversion typically costs £2,450–£4,150 per m² for converting an existing cellar, including VAT at 20% (standard rate). For a typical 30 m² project that is roughly £73,500–£124,500. The guide for Kingston upon Thames reflects typical costs in London, roughly 30% above the UK-wide figure. Design, structural calculations and council fees are extra.
| Size or type | Guide range |
|---|---|
| Smaller project (21 m²) | £51,500–£87,000 |
| Typical project (30 m²) | £73,500–£124,500 |
| Larger project (42 m²) | £103,000–£174,500 |
| Rate per m² | £2,450–£4,150 |
The main things that change the cost:
- Lightwells
- Ground water and access
- Existing cellar or new excavation
- Party wall surveyor fees
Your exact price depends on the survey and drawings. The guide price tool gives a quick range in the meantime.
Do you need planning permission for a basement conversion in Kingston upon Thames?
Approvals for a basement conversion in Kingston upon Thames follow the rules for England. In England converting an existing cellar with no external change usually does not need planning permission. New excavation, lightwells and changes to the front often do, and some councils, particularly in London, have specific basement policies.
Building regulations approval comes from the council’s building control service or a registered building control approver. The work is inspected at key stages, such as foundations, drainage and insulation, and a completion certificate is issued at the end.
Our first visit includes a check of your planning history, so you know the route before paying for drawings.
What we handle
Handled as part of most basement conversions:
- Insulation, ventilation and drainage pumps
- Building control sign-off
- Lightwells and windows
- Waterproofing design (tanking or cavity drain membrane)
- Party wall notices
- Electrics, heating and plastering
How long does it take?
Allow 8 to 16 weeks for a cellar conversion; longer for new excavation. Design and approvals come first and typically take 3 to 5 months, depending on the approval route.
Building in Kingston upon Thames
Many London boroughs have conservation areas and detailed design guides, so early design advice saves time at the planning stage.
If your home is in Kingston upon Thames or close by in Teddington, Twickenham and Richmond, a free home visit is the first step.
How it works
- 01
Free visit
We look at the property, talk through what you want and measure up. There is no charge and no obligation.
- 02
Design and pricing
Design options, then a fixed quote based on the chosen drawings and specification.
- 03
Approvals
Planning or permitted development confirmation, building regulations and any party wall matters.
- 04
Build and sign-off
We run the build to a written programme and hand over the completion certificate.
Questions about basement conversions in Kingston upon Thames
How much does a basement conversion cost in Kingston upon Thames?
In Kingston upon Thames, a basement conversion typically costs £2,450–£4,150 per m² for converting an existing cellar, including VAT at 20% (standard rate). A typical 30 m² project comes to roughly £73,500–£124,500. Your fixed price depends on the survey and drawings.
How long does a basement conversion take in Kingston upon Thames?
Typically 8 to 16 weeks for a cellar conversion; longer for new excavation. Design and approvals beforehand usually take 3 to 5 months.
Can a basement be a bedroom?
Yes, with a suitable escape route such as a lightwell window or protected stair.
How do you keep a basement dry?
With a waterproofing system designed to BS 8102, typically a cavity drain membrane with a sump pump, or a tanking system.
Is new excavation worth it?
It can be in high-value areas, but costs are high. We give a feasibility view before design starts.