What is a basement conversion?
A basement conversion turns an existing cellar into living space, or excavates a new basement under the house or garden. Waterproofing, structural support and daylight are the main design challenges.
How much does a basement conversion cost in Melton Mowbray?
In Melton Mowbray, a basement conversion typically costs £1,800–£3,050 per m² for converting an existing cellar, including VAT at 20% (standard rate). For a typical 30 m² project that is roughly £54,000–£91,500. Prices across the East Midlands are typically 5% below the UK average for this kind of work, which is reflected in the range for Melton Mowbray. Design, structural calculations and council fees are extra.
| Size or type | Guide range |
|---|---|
| Smaller project (21 m²) | £38,000–£64,000 |
| Typical project (30 m²) | £54,000–£91,500 |
| Larger project (42 m²) | £75,500–£128,000 |
| Rate per m² | £1,800–£3,050 |
The main things that change the cost:
- Floor lowering and underpinning
- Party wall surveyor fees
- Existing cellar or new excavation
- Ground water and access
Use the guide price tool to see how size and specification change the figure, then ask for a written, itemised quote.
Do you need planning permission for a basement conversion in Melton Mowbray?
Here is how the rules work for a basement conversion in England. In England converting an existing cellar with no external change usually does not need planning permission. New excavation, lightwells and changes to the front often do, and some councils, particularly in London, have specific basement policies.
Building regulations approval comes from the council’s building control service or a registered building control approver. The work is inspected at key stages, such as foundations, drainage and insulation, and a completion certificate is issued at the end.
At the survey we check your house’s planning history and any restrictions, and tell you which route applies.
What we handle
Handled as part of most basement conversions:
- Lightwells and windows
- Underpinning or new structure where needed
- Waterproofing design (tanking or cavity drain membrane)
- Party wall notices
- Building control sign-off
- Insulation, ventilation and drainage pumps
How long does it take?
The build itself usually takes 8 to 16 weeks for a cellar conversion; longer for new excavation. Design and approvals come first and typically take 3 to 5 months, depending on the approval route.
Building in Melton Mowbray
In the East Midlands, many estates built since the 1960s have integral garages that convert well into a study or bedroom.
If your home is in Melton Mowbray or close by in Oakham, Loughborough and Leicester, a free home visit is the first step.
How it works
- 01
Free visit
We look at the property, talk through what you want and measure up. There is no charge and no obligation.
- 02
Design and fixed quote
Drawings, structural calculations and an itemised, fixed price for the agreed specification.
- 03
Approvals in place
We handle planning, building control and neighbour notices before work starts.
- 04
Build and sign-off
We run the build to a written programme and hand over the completion certificate.
Questions about basement conversions in Melton Mowbray
How long does a basement conversion take in Melton Mowbray?
Typically 8 to 16 weeks for a cellar conversion; longer for new excavation. Design and approvals beforehand usually take 3 to 5 months.
Does a basement conversion need planning permission?
Converting an existing cellar without changing the outside usually does not. New excavation, lightwells and changes visible from outside usually do.
Can a basement be a bedroom?
Yes, with a suitable escape route such as a lightwell window or protected stair.
How much does a basement conversion cost in Melton Mowbray?
In Melton Mowbray, a basement conversion typically costs £1,800–£3,050 per m² for converting an existing cellar, including VAT at 20% (standard rate). A typical 30 m² project comes to roughly £54,000–£91,500. Your fixed price depends on the survey and drawings.
Is new excavation worth it?
It can be in high-value areas, but costs are high. We give a feasibility view before design starts.