What is a dormer loft conversion?
A dormer loft conversion adds a box-shaped structure to the rear roof slope, creating vertical walls and full headroom across most of the new room. It is the most common loft conversion in the UK because it works on terraced, semi-detached and detached houses.
How much does a dormer loft conversion cost in Royton?
In Royton, a dormer loft conversion typically costs £45,000–£64,000 for a typical rear dormer with en-suite, including VAT at 20% (standard rate). The guide for Royton reflects typical costs in the North West, roughly 6% below the UK-wide figure. Design, structural calculations and council fees are extra.
| Size or type | Guide range |
|---|---|
| A typical rear dormer with en-suite | £45,000–£64,000 |
| Higher specification | £64,000–£80,000 |
What moves the price most:
- Staircase position
- Built-in storage and finishes
- Fire safety upgrades to the existing house
- En-suite or bathroom
A guide range is only a starting point: the guide price tool gives an instant figure for your size, and a free survey turns it into a fixed quote.
Do you need planning permission for a dormer loft conversion in Royton?
The approval route for Royton is set by planning law in England. In England a rear dormer is often permitted development if the extra roof volume is no more than 40 cubic metres on a terraced house or 50 on other houses, it does not face the road, sits no higher than the ridge and is set back from the eaves, with matching materials and obscure-glazed side windows. Balconies, front dormers and work in conservation areas need planning permission.
Where work involves a shared wall, building on the boundary, or digging foundations within 3 metres of a neighbour’s building and deeper than its foundations (or within 6 metres for deeper work), the Party Wall etc. Act 1996 applies and notices must be served before work starts.
If the answer is not clear-cut, we can apply for formal confirmation before you commit to the build.
What we handle
The work we manage on a dormer loft conversion:
- Insulation, plastering, electrics and plumbing
- Dormer structure, roof covering and windows
- Party wall notices for shared walls
- Measured survey and head-height check
- Building control completion certificate
- New staircase and fire-safe escape route
How long does it take?
Build time is typically 6 to 9 weeks on site. Allow time beforehand for drawings and approvals, usually 6 to 12 weeks.
Building in Royton
The North West has many brick terraces and inter-war semis, where kitchen extensions and dormer loft conversions add space without moving.
Royton sits in Greater Manchester, about 8 miles north-east of Manchester. We cover the whole of Royton, including postcodes OL2.
How it works
- 01
Visit and measured survey
A free visit to understand the project, check access and take measurements.
- 02
Drawings and written quote
We prepare the design and give you a written, itemised quote with inclusions and exclusions.
- 03
Approvals in place
We handle planning, building control and neighbour notices before work starts.
- 04
Build and sign-off
We run the build to a written programme and hand over the completion certificate.
Questions about dormer loft conversions in Royton
What fire safety is required?
Building regulations require a safe escape route. Converting a two-storey house to three storeys usually means a protected stairway with fire doors to habitable rooms and mains-wired smoke alarms.
Who approves a dormer loft conversion in Royton?
Planning matters in Royton go to the council covering your address, and the work needs building control approval. We prepare and submit the applications for you.
Will I need to move out?
No. Most of the work is done from scaffolding and the roof. The new staircase is formed near the end, which causes a few days of disruption.
How much does a dormer loft conversion cost in Royton?
In Royton, a dormer loft conversion typically costs £45,000–£64,000 for a typical rear dormer with en-suite, including VAT at 20% (standard rate). Your fixed price depends on the survey and drawings.
How much head height do I need?
Ideally at least 2.2 metres from the top of the ceiling joists to the underside of the ridge. Less can still work with a dormer, but we check this at the survey.