SK Developments Free home visit0800 088 6248 Get a quote

MerseysideDouble-storey extensions

Double-storey extensions in Birkenhead

Looking for a builder for a double-storey extension in Birkenhead? We design and build double-storey extensions across Merseyside, covering postcodes such as CH41 and CH42.

Guide price in Birkenhead

£1,550–£2,350 per m² of floor area (both floors)

In Birkenhead, a double-storey extension typically costs £1,550–£2,350 per m² of floor area (both floors), including VAT at 20% (standard rate). For a typical 36 m² project that is roughly £56,000–£84,500.

Book a free home visit

Tell us about your project. We reply to arrange a visit and a fixed quote.

Free home visit and measured survey
Fixed price for the agreed specification
Drawings, approvals and build in one contract
Building control sign-off arranged
England, Wales, Scotland and Northern Ireland

What is a double-storey extension?

Double-storey rear extension in buff brick with a glass Juliet balcony and wide glazed doors

A double-storey extension (also called a two-storey extension) adds rooms on both the ground and first floor in one build. It typically gives a larger kitchen or living space downstairs and an extra bedroom or bathroom above.

How much does a double-storey extension cost in Birkenhead?

In Birkenhead, a double-storey extension typically costs £1,550–£2,350 per m² of floor area (both floors), including VAT at 20% (standard rate). For a typical 36 m² project that is roughly £56,000–£84,500. Prices across the North West are typically 6% below the UK average for this kind of work, which is reflected in the range for Birkenhead. Design, structural calculations and council fees are extra.

Guide prices for Birkenhead, including VAT at 20% (standard rate)
Size or typeGuide range
Smaller project (25 m²)£39,000–£59,000
Typical project (36 m²)£56,000–£84,500
Larger project (50 m²)£77,500–£117,500
Rate per m²£1,550–£2,350

The main things that change the cost:

  • Scaffolding and access to the rear
  • Total floor area across both floors
  • Brick matching and external finishes
  • Roof design and how it joins the existing roof

Your exact price depends on the survey and drawings. The guide price tool gives a quick range in the meantime.

Do you need planning permission for a double-storey extension in Birkenhead?

Here is how the rules work for a double-storey extension in England. In England an extension of more than one storey can only be permitted development at the rear, no more than 3 metres deep and at least 7 metres from the rear boundary, with matching materials and any upper side windows obscure-glazed. Most double-storey extensions therefore go through a householder planning application.

Where work involves a shared wall, building on the boundary, or digging foundations within 3 metres of a neighbour’s building and deeper than its foundations (or within 6 metres for deeper work), the Party Wall etc. Act 1996 applies and notices must be served before work starts.

We check this for your address before design work starts, so there are no surprises later.

What we handle

What we take care of:

  • Brick or block walls, floors and a roof tied into the house
  • Electrics, heating, plumbing and plastering
  • Opening up at both levels with steel beams
  • Design drawings and planning application
  • Building control sign-off
  • Structural engineer’s calculations

How long does it take?

Allow 14 to 20 weeks on site, after planning and building control approval. Design and approvals come first and typically take 3 to 4 months, depending on the approval route.

Building in Birkenhead

Terraced streets across the North West often suit rear dormers and single-storey kitchen extensions.

Birkenhead sits in Merseyside, about 2 miles south-west of Liverpool. We cover the whole of Birkenhead, including postcodes CH41 and CH42.

How it works

  1. 01

    Visit and measured survey

    A free visit to understand the project, check access and take measurements.

  2. 02

    Drawings and written quote

    We prepare the design and give you a written, itemised quote with inclusions and exclusions.

  3. 03

    Approvals

    Planning or permitted development confirmation, building regulations and any party wall matters.

  4. 04

    Build and handover

    Work follows the agreed programme, with inspections along the way and a completion certificate at the end.

Questions about double-storey extensions in Birkenhead

Does a double-storey extension need planning permission?

Usually. In England a two-storey rear extension can only be permitted development if it is no more than 3 metres deep and at least 7 metres from the rear boundary, and side extensions over one storey always need permission. In practice most are approved through a planning application.

How much does a double-storey extension cost in Birkenhead?

In Birkenhead, a double-storey extension typically costs £1,550–£2,350 per m² of floor area (both floors), including VAT at 20% (standard rate). A typical 36 m² project comes to roughly £56,000–£84,500. Your fixed price depends on the survey and drawings.

Is a double-storey extension cheaper per square metre?

Usually yes. You pay for one set of foundations and one roof but get two floors of space, so the cost per square metre is often lower than a single-storey extension.

Do you build double-storey extensions in Birkenhead?

Yes. We build double-storey extensions across Birkenhead, including postcodes CH41 and CH42. Every project starts with a free home visit.

Can I live at home during the work?

Most families stay put. The shell is built first and the house is opened up late in the job, so disruption inside is limited to a few weeks.

Start with a guide price, then book a free survey for a fixed quote in Birkenhead.

Call 0800 088 6248 or get an instant guide price online.

Call 0800 088 6248Get a guide price