SK Developments Free home visit0800 088 6248 Get a quote

DerbyshireHouse renovations

House renovations in Derby

Looking for a builder for a house renovation in Derby? We design and build house renovations across Derbyshire, covering postcodes such as DE1.

Guide price in Derby

£850–£1,700 per m² for a medium to full renovation

In Derby, a house renovation typically costs £850–£1,700 per m² for a medium to full renovation, including VAT at 20% (5% may apply to homes empty for two years or more). For a typical 90 m² project that is roughly £76,500–£153,000.

Book a free home visit

Tell us about your project. We reply to arrange a visit and a fixed quote.

Free home visit and measured survey
Fixed price for the agreed specification
Drawings, approvals and build in one contract
Building control sign-off arranged
England, Wales, Scotland and Northern Ireland

What is a house renovation?

Renovated Victorian living room with a restored fireplace, sash windows and pine floorboards

A house renovation brings an older or tired home up to date. It can include rewiring, a new heating system, replastering, new floors, windows, kitchens and bathrooms, and changes to the layout. A full renovation is often combined with an extension or loft conversion.

How much does a house renovation cost in Derby?

In Derby, a house renovation typically costs £850–£1,700 per m² for a medium to full renovation, including VAT at 20% (5% may apply to homes empty for two years or more). For a typical 90 m² project that is roughly £76,500–£153,000. Building costs in the East Midlands run about 5% below the UK average, and the figures for Derby are adjusted to reflect that. Design, structural calculations and council fees are extra.

Guide prices for Derby, including VAT at 20% (5% may apply to homes empty for two years or more)
Size or typeGuide range
Smaller project (63 m²)£53,500–£107,000
Typical project (90 m²)£76,500–£153,000
Larger project (126 m²)£107,000–£214,000
Rate per m²£850–£1,700

Your quote will depend mainly on:

  • Whether you live in during the work
  • Finishes
  • Structural and damp repairs
  • Extent of rewiring and replumbing

A guide range is only a starting point: the guide price tool gives an instant figure for your size, and a free survey turns it into a fixed quote.

Do you need planning permission for a house renovation in Derby?

The approval route for Derby is set by planning law in England. In England internal renovation usually does not need planning permission unless the house is listed, when listed building consent covers internal work too. Notifiable work such as rewiring, structural changes, new windows and heating must meet building regulations.

Building regulations approval comes from the council’s building control service or a registered building control approver. The work is inspected at key stages, such as foundations, drainage and insulation, and a completion certificate is issued at the end.

At the survey we check your house’s planning history and any restrictions, and tell you which route applies.

What we handle

On a typical house renovation we handle:

  • Structural repairs and damp treatment
  • Kitchens and bathrooms
  • Decoration
  • Building control for notifiable work
  • Joinery, doors and floors
  • Plastering and boarding

How long does it take?

Build time is typically 8 to 20 weeks on site depending on scope. Design and approvals come first and typically take 6 to 12 weeks, depending on the approval route.

Building in Derby

The East Midlands has a mix of red-brick terraces, inter-war semis and newer estates, so rear extensions and garage conversions are common projects.

From DE1 outwards, we take on projects throughout Derby and the surrounding parts of Derbyshire.

How it works

  1. 01

    Free visit

    We look at the property, talk through what you want and measure up. There is no charge and no obligation.

  2. 02

    Drawings and written quote

    We prepare the design and give you a written, itemised quote with inclusions and exclusions.

  3. 03

    Permissions sorted

    Applications, building control and neighbour arrangements, all before the start date.

  4. 04

    Construction and completion

    We build, put right any snags and hand over the building control certificate.

Questions about house renovations in Derby

How much does a house renovation cost in Derby?

In Derby, a house renovation typically costs £850–£1,700 per m² for a medium to full renovation, including VAT at 20% (5% may apply to homes empty for two years or more). A typical 90 m² project comes to roughly £76,500–£153,000. Your fixed price depends on the survey and drawings.

Can I live in the house during a renovation?

For light work, yes. For a full renovation, most clients move out for some or all of the job.

How long does a house renovation take in Derby?

Typically 8 to 20 weeks on site depending on scope. Design and approvals beforehand usually take 6 to 12 weeks.

Do I need planning permission to renovate?

Internal work usually does not need planning permission unless the house is listed. External changes may.

Do you renovate listed buildings?

Yes, with listed building consent and appropriate materials.

Get a free, no-obligation home visit for your house renovation in Derby.

Call 0800 088 6248 or get an instant guide price online.

Call 0800 088 6248Get a guide price