What is a basement conversion?
A basement conversion turns an existing cellar into living space, or excavates a new basement under the house or garden. Waterproofing, structural support and daylight are the main design challenges.
How much does a basement conversion cost in Derby?
In Derby, a basement conversion typically costs £1,800–£3,050 per m² for converting an existing cellar, including VAT at 20% (standard rate). For a typical 30 m² project that is roughly £54,000–£91,500. Building costs in the East Midlands run about 5% below the UK average, and the figures for Derby are adjusted to reflect that. Design, structural calculations and council fees are extra.
| Size or type | Guide range |
|---|---|
| Smaller project (21 m²) | £38,000–£64,000 |
| Typical project (30 m²) | £54,000–£91,500 |
| Larger project (42 m²) | £75,500–£128,000 |
| Rate per m² | £1,800–£3,050 |
Your quote will depend mainly on:
- Lightwells
- Existing cellar or new excavation
- Waterproofing system
- Ground water and access
Use the guide price tool to see how size and specification change the figure, then ask for a written, itemised quote.
Do you need planning permission for a basement conversion in Derby?
Whether you need planning permission depends on your house and its location in England. In England converting an existing cellar with no external change usually does not need planning permission. New excavation, lightwells and changes to the front often do, and some councils, particularly in London, have specific basement policies.
Where work involves a shared wall, building on the boundary, or digging foundations within 3 metres of a neighbour’s building and deeper than its foundations (or within 6 metres for deeper work), the Party Wall etc. Act 1996 applies and notices must be served before work starts.
If the answer is not clear-cut, we can apply for formal confirmation before you commit to the build.
What we handle
From survey to sign-off, the job normally involves:
- Building control sign-off
- Structural and ground survey
- Lightwells and windows
- Waterproofing design (tanking or cavity drain membrane)
- Party wall notices
- Insulation, ventilation and drainage pumps
How long does it take?
Expect 8 to 16 weeks for a cellar conversion; longer for new excavation. Before that, surveys, drawings and approvals usually take 3 to 5 months, longer if the council asks for changes.
Building in Derby
The East Midlands has a mix of red-brick terraces, inter-war semis and newer estates, so rear extensions and garage conversions are common projects.
From DE1 outwards, we take on projects throughout Derby and the surrounding parts of Derbyshire.
How it works
- 01
Visit and measured survey
A free visit to understand the project, check access and take measurements.
- 02
Design and pricing
Design options, then a fixed quote based on the chosen drawings and specification.
- 03
Approvals
Planning or permitted development confirmation, building regulations and any party wall matters.
- 04
Build and sign-off
We run the build to a written programme and hand over the completion certificate.
Questions about basement conversions in Derby
Can a basement be a bedroom?
Yes, with a suitable escape route such as a lightwell window or protected stair.
How much does a basement conversion cost in Derby?
In Derby, a basement conversion typically costs £1,800–£3,050 per m² for converting an existing cellar, including VAT at 20% (standard rate). A typical 30 m² project comes to roughly £54,000–£91,500. Your fixed price depends on the survey and drawings.
Do I need party wall agreements?
In England and Wales, excavating near a neighbour’s foundations usually triggers the Party Wall etc. Act 1996.
How long does it take?
A cellar conversion takes around 8 to 16 weeks; new basements take longer.
Who approves a basement conversion in Derby?
Planning matters in Derby go to the council covering your address, and the work needs building control approval. We prepare and submit the applications for you.