What is a single-storey extension?
A single-storey extension is a ground-floor addition, usually at the rear of a house, that enlarges a kitchen, living or dining space. Most are built with cavity walls on concrete foundations and finished with a flat roof and roof lantern or a pitched tiled roof.
How much does a single-storey extension cost in Washington?
In Washington, a single-storey extension typically costs £1,750–£2,600 per m² of floor area, including VAT at 20% (standard rate). For a typical 20 m² project that is roughly £35,000–£52,000. Building costs in the North East run about 10% below the UK average, and the figures for Washington are adjusted to reflect that. Design, structural calculations and council fees are extra.
| Size or type | Guide range |
|---|---|
| Smaller project (14 m²) | £24,500–£36,500 |
| Typical project (20 m²) | £35,000–£52,000 |
| Larger project (28 m²) | £49,000–£73,000 |
| Rate per m² | £1,750–£2,600 |
The main things that change the cost:
- Floor area and the length of new wall
- Roof type and the size of any lantern or roof windows
- Ground conditions and foundation depth
- Kitchen, flooring and finishes, which we can include or leave to you
For a figure based on your own measurements, try the guide price tool, then book a free home visit for a fixed quote.
Do you need planning permission for a single-storey extension in Washington?
The approval route for Washington is set by planning law in England. In England a single-storey rear extension is often permitted development: broadly up to 3 metres deep on a semi-detached or terraced house and 4 metres on a detached house, no higher than 4 metres, with eaves no higher than 3 metres within 2 metres of a boundary, and covering no more than half the garden. The larger home extension scheme allows up to 6 or 8 metres if you notify the council first and neighbours have a chance to comment. In conservation areas, National Parks and National Landscapes the larger home extension route, side extensions and cladding are not permitted development. Flats and houses whose rights have been removed need a planning application, and listed buildings need listed building consent.
Where work involves a shared wall, building on the boundary, or digging foundations within 3 metres of a neighbour’s building and deeper than its foundations (or within 6 metres for deeper work), the Party Wall etc. Act 1996 applies and notices must be served before work starts.
Our first visit includes a check of your planning history, so you know the route before paying for drawings.
What we handle
The work we manage on a single-storey extension:
- Knock-through to the existing house with steel beams
- Building control inspections and completion certificate
- Structural calculations for steels and lintels
- Cavity walls, insulation and roof to current building regulations
- Doors, windows and roof glazing installed
- Measured survey and design drawings
How long does it take?
Expect 10 to 14 weeks on site for a typical rear extension, after approvals. Before that, surveys, drawings and approvals usually take 6 to 12 weeks, longer if the council asks for changes.
Building in Washington
Across the North East, colliery-era terraces and newer estates sit side by side, so the right project depends on the house type.
Projects in Washington (NE37 and NE38) are surveyed in person before we quote, so the price reflects your actual property.
How it works
- 01
Survey and brief
We visit, discuss your ideas and budget, and survey the property or site at no cost.
- 02
Design and fixed quote
Drawings, structural calculations and an itemised, fixed price for the agreed specification.
- 03
Permissions sorted
Applications, building control and neighbour arrangements, all before the start date.
- 04
Build and sign-off
We run the build to a written programme and hand over the completion certificate.
Questions about single-storey extensions in Washington
Do I need a party wall agreement?
If you are in England or Wales and the work involves a shared wall, building on the boundary or digging foundations close to a neighbour, the Party Wall etc. Act 1996 applies and notices must be served before work starts. We advise on this at the design stage.
How much does a single-storey extension cost in Washington?
In Washington, a single-storey extension typically costs £1,750–£2,600 per m² of floor area, including VAT at 20% (standard rate). A typical 20 m² project comes to roughly £35,000–£52,000. Your fixed price depends on the survey and drawings.
How long does a single-storey extension take?
Once approvals are in place, a typical rear extension takes 10 to 14 weeks on site. Design and approvals usually take another 6 to 12 weeks beforehand, depending on whether a planning application is needed.
What is a build-over agreement?
If a public sewer runs within 3 metres of the extension, the water company normally has to agree to the work before it starts. We check sewer records during design and apply where needed.
Do you build single-storey extensions in Washington?
Yes. We build single-storey extensions across Washington, including postcodes NE37 and NE38. Every project starts with a free home visit.