SK Developments Free home visit0800 088 6248 Get a quote

Tyne and WearWraparound extensions

Wraparound extensions in Washington

Looking for a builder for a wraparound extension in Washington? We design and build wraparound extensions across Tyne and Wear, covering postcodes such as NE37 and NE38.

Guide price in Washington

£2,000–£2,900 per m² of floor area

In Washington, a wraparound extension typically costs £2,000–£2,900 per m² of floor area, including VAT at 20% (standard rate). For a typical 28 m² project that is roughly £56,000–£81,000.

Book a free home visit

Tell us about your project. We reply to arrange a visit and a fixed quote.

Free home visit and measured survey
Fixed price for the agreed specification
Drawings, approvals and build in one contract
Building control sign-off arranged
England, Wales, Scotland and Northern Ireland

What is a wraparound extension?

L-shaped wraparound extension with a frameless glass corner and steel-look doors on a London terrace

A wraparound extension combines a side return and a rear extension into one L-shaped addition. It gives the largest possible ground floor, often creating an open-plan kitchen, dining and living space across the whole width of the house.

How much does a wraparound extension cost in Washington?

In Washington, a wraparound extension typically costs £2,000–£2,900 per m² of floor area, including VAT at 20% (standard rate). For a typical 28 m² project that is roughly £56,000–£81,000. The guide for Washington reflects typical costs in the North East, roughly 10% below the UK-wide figure. Design, structural calculations and council fees are extra.

Guide prices for Washington, including VAT at 20% (standard rate)
Size or typeGuide range
Smaller project (20 m²)£40,000–£58,000
Typical project (28 m²)£56,000–£81,000
Larger project (39 m²)£78,000–£113,000
Rate per m²£2,000–£2,900

The biggest cost drivers are:

  • Steelwork and propping of the existing house
  • Access for materials on terraced streets
  • Kitchen and flooring specification
  • Drainage changes

A guide range is only a starting point: the guide price tool gives an instant figure for your size, and a free survey turns it into a fixed quote.

Do you need planning permission for a wraparound extension in Washington?

Before anything is built in Washington, we confirm which approvals apply in England. In England a wraparound extension combines side and rear elements, which normally takes it outside permitted development, so a householder planning application is made.

Where work involves a shared wall, building on the boundary, or digging foundations within 3 metres of a neighbour’s building and deeper than its foundations (or within 6 metres for deeper work), the Party Wall etc. Act 1996 applies and notices must be served before work starts.

At the survey we check your house’s planning history and any restrictions, and tell you which route applies.

What we handle

What we take care of:

  • Design and planning application
  • Underfloor heating option, electrics and plastering
  • Walls, roof and glazing
  • Party wall notices and surveyor liaison
  • Removal of internal and external walls
  • Foundations and drainage

How long does it take?

The build itself usually takes 12 to 18 weeks on site. Allow time beforehand for drawings and approvals, usually 3 to 4 months.

Building in Washington

Across the North East, colliery-era terraces and newer estates sit side by side, so the right project depends on the house type.

Projects in Washington (NE37 and NE38) are surveyed in person before we quote, so the price reflects your actual property.

How it works

  1. 01

    Survey and brief

    We visit, discuss your ideas and budget, and survey the property or site at no cost.

  2. 02

    Design and fixed quote

    Drawings, structural calculations and an itemised, fixed price for the agreed specification.

  3. 03

    Permissions sorted

    Applications, building control and neighbour arrangements, all before the start date.

  4. 04

    Construction and completion

    We build, put right any snags and hand over the building control certificate.

Questions about wraparound extensions in Washington

Who approves a wraparound extension in Washington?

Planning matters in Washington go to the council covering your address, and the work needs building control approval. We prepare and submit the applications for you.

How long does it take to build?

Around 12 to 18 weeks on site after approvals. Design, planning and party wall matters usually take 3 to 4 months beforehand.

Will both neighbours be affected?

Usually only the neighbour on the side return side, but rear foundations near either boundary can trigger party wall notices.

How much does a wraparound extension cost in Washington?

In Washington, a wraparound extension typically costs £2,000–£2,900 per m² of floor area, including VAT at 20% (standard rate). A typical 28 m² project comes to roughly £56,000–£81,000. Your fixed price depends on the survey and drawings.

What about the old back addition?

The side wall of the back addition is usually removed and replaced with a steel beam, so the old kitchen joins the new space.

Start with a guide price, then book a free survey for a fixed quote in Washington.

Call 0800 088 6248 or get an instant guide price online.

Call 0800 088 6248Get a guide price