SK Developments Free home visit0800 088 6248 Get a quote

HampshireStructural alterations and knock-throughs

Structural alterations and knock-throughs in Basingstoke

Thinking about a structural alteration in Basingstoke? We can take it from first ideas to finished, signed-off work, with a written programme before work starts.

Guide price in Basingstoke

£5,000–£10,500 for a typical knock-through with steel beam

In Basingstoke, a structural alteration typically costs £5,000–£10,500 for a typical knock-through with steel beam, including VAT at 20% (standard rate).

Book a free home visit

Tell us about your project. We reply to arrange a visit and a fixed quote.

Free home visit and measured survey
Fixed price for the agreed specification
Drawings, approvals and build in one contract
Building control sign-off arranged
England, Wales, Scotland and Northern Ireland

What is a structural alteration?

Steel beam installed across a wide opening with props in place during a knock-through

A structural alteration changes how a house carries its loads, most often by removing a load-bearing wall and replacing it with a steel beam. It is how kitchens and dining rooms become open-plan, and how extensions are joined to the original house.

How much does a structural alteration cost in Basingstoke?

In Basingstoke, a structural alteration typically costs £5,000–£10,500 for a typical knock-through with steel beam, including VAT at 20% (standard rate). That range is adjusted for the South East, where domestic building work typically costs around 12% above the national average. Design, structural calculations and council fees are extra.

Guide prices for Basingstoke, including VAT at 20% (standard rate)
Size or typeGuide range
A typical knock-through with steel beam£5,000–£10,500
Higher specification£10,500–£13,000

Your quote will depend mainly on:

  • Flush or downstand beam
  • Span of the opening
  • What sits above the wall
  • Floor and ceiling repairs

A guide range is only a starting point: the guide price tool gives an instant figure for your size, and a free survey turns it into a fixed quote.

Do you need planning permission for a structural alteration in Basingstoke?

Whether you need planning permission depends on your house and its location in England. In England removing a load-bearing wall does not need planning permission but does need building regulations approval with an engineer’s calculations. If the beam bears on a party wall, a party wall notice must be served.

Where work involves a shared wall, building on the boundary, or digging foundations within 3 metres of a neighbour’s building and deeper than its foundations (or within 6 metres for deeper work), the Party Wall etc. Act 1996 applies and notices must be served before work starts.

Our first visit includes a check of your planning history, so you know the route before paying for drawings.

What we handle

From survey to sign-off, the job normally involves:

  • Structural engineer’s calculations and drawings
  • Party wall notices where needed
  • Steel beam supply and installation on padstones
  • Fire protection to the steel
  • Building control sign-off
  • Making good, plastering and flooring repairs

How long does it take?

Build time is typically 1 to 2 weeks on site for a typical knock-through. Allow time beforehand for drawings and approvals, usually 6 to 12 weeks.

Building in Basingstoke

The South East has a broad mix of housing, from Victorian terraces in the towns to post-war semis and newer estates, so extension types vary street by street.

Basingstoke sits in Hampshire, about 14 miles south of Reading. We cover the whole of Basingstoke, including postcodes RG21.

How it works

  1. 01

    Survey and brief

    We visit, discuss your ideas and budget, and survey the property or site at no cost.

  2. 02

    Design and pricing

    Design options, then a fixed quote based on the chosen drawings and specification.

  3. 03

    Approvals

    Planning or permitted development confirmation, building regulations and any party wall matters.

  4. 04

    Build and handover

    Work follows the agreed programme, with inspections along the way and a completion certificate at the end.

Questions about structural alterations in Basingstoke

Do I need building regulations approval?

Yes. Removing a load-bearing wall is building work that needs approval, with calculations for the beam.

What fire protection does a steel need?

Usually fire-rated plasterboard or intumescent paint, as building control requires.

How long does a structural alteration take in Basingstoke?

Typically 1 to 2 weeks on site for a typical knock-through. Design and approvals beforehand usually take 6 to 12 weeks.

How much does a structural alteration cost in Basingstoke?

In Basingstoke, a structural alteration typically costs £5,000–£10,500 for a typical knock-through with steel beam, including VAT at 20% (standard rate). Your fixed price depends on the survey and drawings.

How do I know if a wall is load-bearing?

Only a survey can confirm it. Walls that carry floor joists, roof loads or walls above are load-bearing. We check on site and the engineer confirms.

Ready to talk about a structural alteration in Basingstoke? Book a free home visit or get an instant guide price.

Call 0800 088 6248 or get an instant guide price online.

Call 0800 088 6248Get a guide price