What is a structural alteration?
A structural alteration changes how a house carries its loads, most often by removing a load-bearing wall and replacing it with a steel beam. It is how kitchens and dining rooms become open-plan, and how extensions are joined to the original house.
How much does a structural alteration cost in Cirencester?
In Cirencester, a structural alteration typically costs £4,500–£9,750 for a typical knock-through with steel beam, including VAT at 20% (standard rate). Prices in the South West sit near the national average for this kind of work, and the range for Cirencester reflects that. Design, structural calculations and council fees are extra.
| Size or type | Guide range |
|---|---|
| A typical knock-through with steel beam | £4,500–£9,750 |
| Higher specification | £9,750–£12,000 |
The main things that change the cost:
- Floor and ceiling repairs
- Moving radiators, sockets and pipes
- What sits above the wall
- Span of the opening
Use the guide price tool to see how size and specification change the figure, then ask for a written, itemised quote.
Do you need planning permission for a structural alteration in Cirencester?
The approval route for Cirencester is set by planning law in England. In England removing a load-bearing wall does not need planning permission but does need building regulations approval with an engineer’s calculations. If the beam bears on a party wall, a party wall notice must be served.
Where work involves a shared wall, building on the boundary, or digging foundations within 3 metres of a neighbour’s building and deeper than its foundations (or within 6 metres for deeper work), the Party Wall etc. Act 1996 applies and notices must be served before work starts.
Our first visit includes a check of your planning history, so you know the route before paying for drawings.
What we handle
The work we manage on a structural alteration:
- Structural engineer’s calculations and drawings
- Temporary propping
- Party wall notices where needed
- Building control application
- Fire protection to the steel
- Making good, plastering and flooring repairs
How long does it take?
Build time is typically 1 to 2 weeks on site for a typical knock-through. Before that, surveys, drawings and approvals usually take 6 to 12 weeks, longer if the council asks for changes.
Building in Cirencester
In parts of the South West, protected landscapes and conservation areas shape what can be built, so materials and roof forms are chosen carefully.
From GL7 outwards, we take on projects throughout Cirencester and the surrounding parts of Gloucestershire.
How it works
- 01
Visit and measured survey
A free visit to understand the project, check access and take measurements.
- 02
Design and fixed quote
Drawings, structural calculations and an itemised, fixed price for the agreed specification.
- 03
Approvals
Planning or permitted development confirmation, building regulations and any party wall matters.
- 04
Build and handover
Work follows the agreed programme, with inspections along the way and a completion certificate at the end.
Questions about structural alterations in Cirencester
Do I need a party wall notice?
In England and Wales, if the beam sits in a party wall, yes.
Do you build structural alterations in Cirencester?
Yes. We build structural alterations across Cirencester, including postcodes GL7. Every project starts with a free home visit.
How do I know if a wall is load-bearing?
Only a survey can confirm it. Walls that carry floor joists, roof loads or walls above are load-bearing. We check on site and the engineer confirms.
How much does a structural alteration cost in Cirencester?
In Cirencester, a structural alteration typically costs £4,500–£9,750 for a typical knock-through with steel beam, including VAT at 20% (standard rate). Your fixed price depends on the survey and drawings.
Do I need building regulations approval?
Yes. Removing a load-bearing wall is building work that needs approval, with calculations for the beam.